Zita reChigadzirwa uye Rudzi: Firimu rinodzivirira kusimbaYM30 Series
Zvimiro Zvikuru zveChigadzirwa
primer imwe chete kana mbiri, inoshanda zvakanaka uye yakaoma kunonoka, yakatsetseka zvakanaka, kutsungirira kwakanaka kwekupisa, kunaka kwepamusoro.
Kushandiswa Kukuru
inoshandiswa pakugadzira firimu rinodzivirira static, firimu rinodzivirira static paste (rinodzivirira guruva, rinodzivirira static).
Maumbirwo
Pepa reData
Ukobvu hweYM30A hunosanganisira: 38μm, 50μm, 75μm, 100μm uye 125μm, nezvimwewo.
| ZVINHU | CHIKAMU | Kukosha Kwakajairika | NZIRA YEKUYEDZA | ||
| KUKOMBORA | µm | 38 | 50 | ASTM D374 | |
| SIMBA RINONYANYA KUTAMBA | MD | MPa | 254 | 232 | ASTM D882 |
| TD | MPa | 294 | 240 | ||
| KURERUTSA | MD | % | 153 | 143 | |
| TD | % | 124 | 140 | ||
| KUPISA KUDIKISA | MD | % | 1.24 | 1.15 | ASTM D1204 （150℃×30min） |
| TD | % | 0.03 | -0.01 | ||
| CHIKAMU CHEKUKANGANANA | μs | — | 0.32 | 0.28 | ASTM D1894 |
| μd | — | 0.39 | 0.29 | ||
| KUTAPURIRANA | % | 93.8 | 92.8 | ASTM D1003 | |
| MAFUTA | % | 1.97 | 2.40 | ||
| KUSIMBISA PAMUSORO | Ω | 105-10 | GB 13542.4 | ||
| KUSIMBISA KUNAMATIRA | % | ≥97 | NZIRA DZEKUGADZIRA PACHIGARO | ||
| KUNYANYA KUNYOROTA | dyne/cm | 58/58 | 58/58 | ASTM D2578 | |
| CHITARISIRO | — | OK | NZIRA YEEMTCO | ||
| ZVIREVO | Pamusoro apa pane tsika dzakajairika, kwete vimbiso. Kana vatengi vaine zvinodiwa zvakakosha, zvichienderana nekuitwa kwechibvumirano chehunyanzvi. | ||||
Kuedza kunyorovesa kunoshanda chete pafirimu rakarapwa corona.
YM30 Series inosanganisira YM30, YM30A, YM31, dzakasiyana neAS primer.
Nguva yekutumira: Gunyana-03-2024
